SAB® Crystal Coat CP 212

350.00 د.إ 350.0 AED

350.00 د.إ

Add to Cart

  • Terms & Conditions 
  • Prices excluding  VAT.
  • Prices excluding delivery costs
  • Delivery: 2 working days, (Weekend Friday, Saturday and Sunday)

SAB® Crystal Coat CP 212

Crystalline Capillary Waterproofing Coating for Concrete

Description:

is a one component, capillary crystalline, waterproof coating, which waterproofs concrete structures by forming insoluble crystals in concrete capillaries. SAB® Crystal Coat CP 212 waterproofs both from negative and positive direction and is ideally suited for basement water proofing. SAB® Crystal Coat CP 212 cures to a hard-robust abrasion resistant coating.

Usage:

Water Retaining Structures such as water tanks and swimming pools, reservoirs, dams, canals, sewerage & water treatment works and concrete pipes.

Water Excluding Structures such as foundations and shallow basements, tunnels and subways, underground cap parks, Inspection pits and lift shafts, Sea defense walls, Bridge decks, Jetties Retaining walls & Civil substructures.

Advantages:

 Negative and Positive waterproofing

 Replaces ineffective sheet membranes. 

Seals shrinkage cracks up to 1/64” (0.4 mm) width.  Reduced chloride permeability.

 Protect concrete and reinforcement from corrosion due to water born substances like chlorides and sulphates.

 Easy to apply product and Excellent adhesion

 Non-toxic and suitable in potable water containment.

 Not a vapor barrier - allows concrete to breathe.

 Negligible interference with water reducers & plasticizers.

 Negligible effect/influence on slump and air entrainment.

 Impervious to physical damage and deterioration

 Non-toxic, inorganic, zero VOC (0%)

 Less costly than traditional methods of waterproofing.

 Economic efficiency

 Improves resistance of concrete structures against weathering and chemical attack.

 

(Typical Properties tested at 25°C under laboratory conditions)

(The properties shown above were obtained under laboratory conditions).

All values given are subject to 10% tolerance



Packaging and Storage:

PACKAGING

20kg Bag

25kg Plastic Pail


COVERAGE

Apply in 2 to 3 coats to achieve an overall thickness of 1.5-2.0mm with an overall material consumption of 2.0-3.0kg/m2.

6m to 10m total coverage.

 


Website Visitors - 370570