RAKAM 304-RAK Bond PVA
(PVA Bonding Agent)
RAK BOND-PVA is a polyvinyl acetate latex emulsion used as a surface sealer, bonding
agent, admixture for cement and mortar.
Uses
Adhesive:
RAK Bond-PVA bonds with almost all
building material except PVC, rubber and
polyethylene. It can be used to bond
plaster board, ceramic tiles, marble, glass,
bricks, wood, leather etc. when added with
suitable filler.
Bonding Agent
This gives mortars, especially topping
mortars very good resistance. The wear
resistance of screed treated with RAK
Bond-PVA is excellent compared to a
conventional screed with common mortar.
The topping will be dust free, wear proof,
water, oil and grease proof.
Admixture
RAK Bond-PVA has a plasticizing eect
which improves mortar application,
increases the mechanical strength of
screeds, reduces shrinkage and has
perfect adhesion even on smooth concrete.
Storage
Up to 12 months in manufacturer's sealed
containers stored in a cool, dry place away
from high temperatures.
Curing
Curing occurs within 3 - 7 days.
Points to be noted:
RAK Bond-PVA is not recommended
where permanent dampness occurs.
Do not use below 5°C
Over trowelling is to be avoided
Always follow the mixing ratio
and instructions.
RAK BOND-PVA is a polyvinyl acetate latex emulsion used as a surface sealer, bonding
agent, admixture for cement and mortar.
Uses
Adhesive:
RAK Bond-PVA bonds with almost all
building material except PVC, rubber and
polyethylene. It can be used to bond
plaster board, ceramic tiles, marble, glass,
bricks, wood, leather etc. when added with
suitable filler.
Bonding Agent
This gives mortars, especially topping
mortars very good resistance. The wear
resistance of screed treated with RAK
Bond-PVA is excellent compared to a
conventional screed with common mortar.
The topping will be dust free, wear proof,
water, oil and grease proof.
Admixture
RAK Bond-PVA has a plasticizing eect
which improves mortar application,
increases the mechanical strength of
screeds, reduces shrinkage and has
perfect adhesion even on smooth concrete.
Storage
Up to 12 months in manufacturer's sealed
containers stored in a cool, dry place away
from high temperatures.
Curing
Curing occurs within 3 - 7 days.
Points to be noted:
RAK Bond-PVA is not recommended
where permanent dampness occurs.
Do not use below 5°C
Over trowelling is to be avoided
Always follow the mixing ratio
and instructions.
طرق العرض
- 3184 عدد المشاهدات
- 2320 موقع المشاهدات
- 864 المشاهدات المدمجة
الإجراءات
- مشاركات اجتماعية
- 3
- 0
- 0تعليقات
عدد المشاركات
- 0 فيسبوك
- 0 توتير
- 0 ينكدين
يتضمن 2
- 146 www.sab-us.com
- 5 161.97.92.48
-
LAVATEX 2000
9983 الآراء -
DCL مطابقة منتج مختبرات بلدية دبي
5484 الآراء -
Optimization Methodology To Implement Thermal
5278 الآراء -
الوقاية من الحرارة والرطوبة العزل المائي
5207 الآراء -
طبقات نظام العزل كومبو رووف
4916 الآراء -
TDS-PC-221-EN_2319 (Plug Cement)
4750 الآراء -
Wurth sealants & Adhesives
4654 الآراء -
AWAZEL PU 250 White
4466 الآراء -
Fosroc Conbextra EPGP
4211 الآراء -
Dr. Fixit PVA BOND.
3982 الآراء -
SAB Trade Mark Certificate
3927 الآراء