RAKAM 503 rak stucco putty
(Interior Stucco Putty)
A poly-vinyl acetate ready mixed putty. designed for flling minor cracks, small dents,
voids, air-holes and eliminating surface imperfections, recommended for use on
interior concrete and plaster surfaces, to give a fine and smooth surface.
Main Features
Can be applied directly on to the surface.
Ease of application.
Easy to sand when dry.
Non-sagging properties at high film
thickness.
Excellent filling properties.
Good adhesive strength.
SURFACE PREPARATION
The surface should be sound, dry and clean,
free from dirt, oil, grease, and loose paint, or powdery material.
New Surfaces
1. Sand the surface until completely smooth,
removes all the dust.
2. If the surface is to0 much dry, the surface should
be wetted with clean water
3. Apply one coat of RAK Primer Sealer or RAK Latex Sealer,
if the surface is too much porous.
4. Apply 1-2 Coats of RAK Wall Putty
5. After drying, sand the putty and clean the surface.
INSTRUCTION FOR USE
Tools -- Spatula, Trowel or Putty Knife.
Thinner -- No thinning required (ready for use)
SUBSEQUENT COATS
RAKAM Primer Sealer
RAKAM Undercoat
Color -- White
Packaging -- 28 Kg./drum,5 Kg/gallon
Physical Specification
Specifte gravity -- Aoprox. 1.75 gic
Solid by weight -- Approx. 72%
Coverage rate -- 05-1.0 Ko/ M depending on surface condition
Dry flim thickness -- max 1 mm
Shelf itfe -- 1 Year
Fiash point -- Not applicable
Finish -- Matt
Drying time at 25 C -- Surface dry approx 1 hour
-- Hard dry approx. 2 hours
Next coat can be applied after 4 hours..
A poly-vinyl acetate ready mixed putty. designed for flling minor cracks, small dents,
voids, air-holes and eliminating surface imperfections, recommended for use on
interior concrete and plaster surfaces, to give a fine and smooth surface.
Main Features
Can be applied directly on to the surface.
Ease of application.
Easy to sand when dry.
Non-sagging properties at high film
thickness.
Excellent filling properties.
Good adhesive strength.
SURFACE PREPARATION
The surface should be sound, dry and clean,
free from dirt, oil, grease, and loose paint, or powdery material.
New Surfaces
1. Sand the surface until completely smooth,
removes all the dust.
2. If the surface is to0 much dry, the surface should
be wetted with clean water
3. Apply one coat of RAK Primer Sealer or RAK Latex Sealer,
if the surface is too much porous.
4. Apply 1-2 Coats of RAK Wall Putty
5. After drying, sand the putty and clean the surface.
INSTRUCTION FOR USE
Tools -- Spatula, Trowel or Putty Knife.
Thinner -- No thinning required (ready for use)
SUBSEQUENT COATS
RAKAM Primer Sealer
RAKAM Undercoat
Color -- White
Packaging -- 28 Kg./drum,5 Kg/gallon
Physical Specification
Specifte gravity -- Aoprox. 1.75 gic
Solid by weight -- Approx. 72%
Coverage rate -- 05-1.0 Ko/ M depending on surface condition
Dry flim thickness -- max 1 mm
Shelf itfe -- 1 Year
Fiash point -- Not applicable
Finish -- Matt
Drying time at 25 C -- Surface dry approx 1 hour
-- Hard dry approx. 2 hours
Next coat can be applied after 4 hours..
طرق العرض
- 3168 عدد المشاهدات
- 2370 موقع المشاهدات
- 798 المشاهدات المدمجة
الإجراءات
- مشاركات اجتماعية
- 2
- 0
- 0تعليقات
عدد المشاركات
- 0 فيسبوك
- 0 توتير
- 0 ينكدين
يتضمن 3
- 20 161.97.92.48
- 104 www.sab-us.com
- 10 161.97.92.48:8011
-
LAVATEX 2000
13217 الآراء -
الوقاية من الحرارة والرطوبة العزل المائي
8088 الآراء -
DCL مطابقة منتج مختبرات بلدية دبي
7823 الآراء -
-
Weber Product List
7410 الآراء -
Wurth sealants & Adhesives
7249 الآراء -
-
Optimization Methodology To Implement Thermal
7089 الآراء -
-
AWAZEL PU 250 White
6645 الآراء -
TDS-PC-221-EN_2319 (Plug Cement)
6515 الآراء -
طبقات نظام العزل كومبو رووف
6290 الآراء -
-
-
-
-
-
Fosroc Conbextra EPGP
5745 الآراء -
Dr. Fixit PVA BOND.
5674 الآراء -