2. AWAZEL CHARACTERISTICS (Typical at 25 C) o DISCLAIMER Since applicaon is conducted beyond our control, AWAZEL company shall not be responsible for improperly applied or misused produ cts. AWAZEL INTERNATIONAL CO. LLC Ras Al Khor Industrial Area 2, Al Manama Road, Dubai, United Arab Emirates TEL: + 971 4 343 3032 FAX: + 971 4 339 3095 AWAZEL Subsidiary of : Arabian Waterproofing Industries Company (AWAZEL) P.O.Box 2955, Riyadh 11461, Kingdom of Saudi Arabia TEL: + 966 1 478 2876 FAX: + 966 1 478 1078 www.awazel.com Flexural strength, 7 days 25 N/mm² 15 N/mm² > 2.5 N/mm² > 75 N/mm² 2.10 kg/ltr +/- 0.10 Tensile strength, 7 days Bond strength, 7 days Compressive strength, 7 days Mixed Density BS 6319-3 BS 6319-7 ASTM D4541 BS 6319-2 ASTM D1475 PROPERTY TYPICAL VALUE TEST METHOD NOTE: The above informaon are provided to the best of our knowledge at the me of manufacturing. Values may vary within toleran ce due to raw material changes and/or unforeseen circumstances. Company ’s . Extra details maybe provided upon request. AWAZEL reserves the right to alter the product specificaon without prior noce TECHNICAL DATA SHEET AWAZEGROUT EP 300 AWAZEGROUT Nil Water penetraon BS EN 12390-8 ATTRIBUTES Supply form THREE PART (PART A- Base), liquid (PART B- Hardener), liquid ( PART C- Aggregates), fine granules Yield 14 L Applicaon thickness 10- 75 mm in single applicaon Pot life 45 +/- 10 min. Applicaon temperature +5°C to +40°C COVERAGE 0.2 m /ltr at 5 mm thickness 2 REF: AWZGRT-EP300-OCT21 AE High Performance, Three-Part Encapsulation Epoxy Grout

1. REF: AWZGRT-EP300-OCT21 ADVANTAGES n Solvent-free n High compressive strength n High load-bearing ability n High physical and mechanical properes n High resistance to chemicals (acids & alkalis) n Moisture tolerant n Rapid hardening n Impact, abrasion & vibraon resistant TYPICAL INSTALLATION PROCEDURES n PREPARATION: Ensure the substrate is clean and free from any contaminang elements. n MIXING: Pour AWAZEGROUT EP 300 base (Part “A”) into a clean container and mix using a slow-speed mechanical mixer (300 rpm) for 2 minutes. n Add AWAZEGROUT EP 300 hardener (Part “B”) and mix for another 3 minutes. n Add AWAZEGROUT EP 300 aggregates (Part “C”) slowly and connuously into the container and mix the 3 parts together unl a uniform and homogeneous mix is a ained. n Seal around the formwork ghtly using a sealing tape or other material prior to pouring AWAZEGROUT to sustain EP 300 water within the formwork and avoid loss of material. n POURING: Immediately aer mixing pour the mix into the formwork starng from the lowest point. Do not pour from a high point to avoid air entrapment. THIS PRODUCT AWAZEGROUT EP 300 is a three component, solvent free, high- build, high-strength epoxy resin system designed for the encapsulaon of pile-head in sub-structure construcon works. The product has an excellent bearing capacity to support the applied structural load. AWAZEGROUT EP 300 bonds ghtly to the pile- head surface thus stops potenal leakages that may occur due to capillary rise through the pile member. Due to its compability with most waterproofing material used for pile-head waterproofing AWAZEGROUT EP 300 plays a significant role in complemenng the waterproofing assembly and protects it against possible damages that maybe incurred by the steel rebars. AWAZEGROUT EP 300 is supplied in a pre-measured ready-to-use packs with high flowa- bility for ease of applicaon. USES & APPLICATIONS n Pile-Head encapsulaon n Void filling in structural repairs n Installaon and anchoring of starter bars SUPPLY & PACKAGING n 3 Part (Base, Hardener & Aggregates) HEALTH & SAFETY n All safety measures should be observed during installaon n Installaon personnel should wear protecve gear at all mes during installaon. For more informaon on safety measures consult the product’s Material Safety Data Sheet. STORAGE & HANDLING n Material should properly be kept in original packing in a venlated shaded area. n Keep away from any possible rain, moisture or water sources. High Performance, Three-Part Encapsulation Epoxy Grout TECHNICAL DATA SHEET AWAZEGROUT EP 300 AWAZEGROUT AWAZEL INTERNATIONAL CO. LLC Ras Al Khor Industrial Area 2, Al Manama Road, Dubai, United Arab Emirates TEL: + 971 4 343 3032 FAX: + 971 4 339 3095 AWAZEL Subsidiary of : Arabian Waterproofing Industries Company (AWAZEL) P.O.Box 2955, Riyadh 11461, Kingdom of Saudi Arabia TEL: + 966 1 478 2876 FAX: + 966 1 478 1078 www.awazel.com AE