Dr fixit Sureseal

Public Channel / Data Sheets

75
COATINGS & PAINTS
Description
Dr. Fixit Sureseal is a specially designed waterproof coating once which cured forms breathable, very tough yet
elastic film which develops strong bonding to damp surfaces. It is ideal for patch repair of internal and external
walls as well as temporary patch repair of roofs. This product offers excellent protection for repaired surfaces and
effectively covers hairline cracks.
Typical Applications
}}Mild damp surfaces of following kind - internal walls, external walls, screed roofs, parapets, chajjas etc.
Features
}}Very tough yet elastic and breathable film
}}Provides strongly bonded waterproof coating
}}No dilution required, ready to use
}}Tintable and can be used over painted surfaces
}}Prevents Mildew, Fungal & bad odour
Packaging
1, 5 & 20 kg
Methods of Application
1 SURFACE PREPARATION
}}Wash the surface thoroughly using water and a strong brush. Remove all loosely bound sand particles, neroo
or instant lime, POP ,black spots, fungus, moss on moisture captured walls and any poorly adhering painted
surface.
}}If the surface under the existing paint is weak and should be stripped, and removed with repeated cleaning
process.
}}Entire surface should be in saturated surface dry (SSD) condition prior to application of Dr. Fixit Sureseal.
}}Inspect the screed, plaster surfaces to identify and locate the cracks,
}}Non- structural cracks less than 2 mm should be cleaned free of dust. Apply/ pour Dr. Fixit Sureseal on the
cracks and wait for it to dry.
}}If existing plaster is in very poor condition, repair the concerned area from positive side to stop the source of
dampness.
2 EXTERIOR WALL APPLICATION
}}Apply two coat of Dr. Fixit Sureseal without any dilution maintaining the spreading rate of 4 to 5 Sq.mtrs/kg/
coat. Allow the first coat to cure for at least 2 to 4 hours before applying the second and final coat.
}}Allow the coating to air cure for 2 days.
3 ROOF APPLICATION
}}Apply two coat of Dr. Fixit Sureseal without any dilution maintaining the spreading rate of 4 to 5 Sq.mtrs/kg/
coat. Allow the first coat to cure for at least 2 to 4 hours before applying the second and final coat.
}}Allow the coating to air cure for 2 days.
Dr. Fixit Sureseal
WATERPROOF COATING FOR PATCH REPAIR OF DAMP & REPAIRED
WALLS AND ROOF
Sureseal 7/09/18
612 Dr. Fixit Sureseal
COATINGS & PAINTS
76
4 INTERNAL DAMP WALL APPLICATION
}}Thorough wire brush followed by sanding with emery paper before application of Dr.Fixit Sureseal.
}}Apply two coat of Dr. Fixit Sureseal without any dilution maintaining the spreading rate of 4 to 5 Sq.mtrs/kg/
coat. Allow the first coat to cure for at least 2 to 4 hours before applying the second and final coat.
}}Allow the coating to air cure for 2 days before proceeding for internal painting.
Precautions & Limitations
}}Do not dilute “Dr. Fixit Sureseal”.
}}All corners, gaps, joints, protrusions & outlets shall be coated with extra coat.
}}All surface cracks more then 2mm should be prepared with polymer modified mortar using Dr. Fixit Pidicrete
URP.
}}Always cover an area larger (minimum 2 Sft for internal walls & 5 Sft on either side for external walls and Roof).
}}Do not apply Dr. Fixit Sureseal on efflorescence.
}}Never apply paint if rain is forecast, or expected, during the day of application.
}}Patch repair on roof & external walls provides temporary relief. Ideal recommendation solution is to go for
comprehensive waterproofing on entire surface.
Technical Information
PROPERTIES SPECIFICATION RESULTS
Appearance Free flowing viscous Liquid
Color White
% Solids 60 ± 2
Tensile Strength (Mpa) ASTM D 412 > 2.5
Water Absorption Resistance ASTM D 471 Excellent
Algae & fungal resistance Excellent
Elongation 45 - 60 %
DFT 180 – 220 in two coats
Theoretical Coverage*
2.0 - 2.5 sqmt/kg in two coats
*Coverage may vary depending upon the texture and porosity of the surface.
Shelf Life
Shelf life is 24 months from the date of manufacturing if stored in original and unopened packaging in a cool dry
place away from direct sunlight.
612 Dr. Fixit Sureseal
77
COATINGS & PAINTS
DISCLAIMER The product information & application details given by the company
& its agents has been provided in good faith & meant to serve only as a general
guideline during usage. Users are advised to carry out tests & take trials to ensure on
the suitability of products meeting their requirement prior to full scale usage of our
products. Since the correct identification of the problems, quality of other materials
used and the on-site workmanship are factors beyond our control, there are no
expressed or implied guarantee / warranty as to the results obtained. The company
does not assume any liability or consequential damage for unsatisfactory results,
arising from the use of our products.
Pidilite Industries Limited
Construction Chemicals Division
Ramkrishna Mandir Road, Post Box No. 17411
Andheri (E) Mumbai 400059 INDIA
Tel +91-22-2835 7000 • Fax +91-22-2835 7008
www.drfixit.co.in • info@drfixit.co.in
Dr. Fixit Advice Centre (Toll Free No.) 1800 209 5504
Health & Safety
}}Skin Contact: Wash skin with soap & water. Remove contaminated clothes.
}}On eye contact: Immediately splash eyes with plenty of water. Consult Physician if irritation persists.
}}Ingestion: It is based on Water Based Coating system, however, seek medical help.
Other Products Categories available
Dr. Fixit brings you the widest range of Construction Chemicals 612 Dr. Fixit Sureseal

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select Link to start with 

3. 77 COATINGS & PAINTS DISCLAIMER The product information & application details given by the company & its agents has been provided in good faith & meant to serve only as a general guideline during usage. Users are advised to carry out tests & take trials to ensure on the suitability of products meeting their requirement prior to full scale usage of our products. Since the correct identification of the problems, quality of other materials used and the on-site workmanship are factors beyond our control, there are no expressed or implied guarantee / warranty as to the results obtained. The company does not assume any liability or consequential damage for unsatisfactory results, arising from the use of our products. Pidilite Industries Limited Construction Chemicals Division Ramkrishna Mandir Road, Post Box No. 17411 Andheri (E) Mumbai 400059 INDIA Tel +91-22-2835 7000 • Fax +91-22-2835 7008 www.drfixit.co.in • info@drfixit.co.in Dr. Fixit Advice Centre (Toll Free No.) 1800 209 5504 Health & Safety } } Skin Contact: Wash skin with soap & water. Remove contaminated clothes. } } On eye contact: Immediately splash eyes with plenty of water. Consult Physician if irritation persists. } } Ingestion: It is based on Water Based Coating system, however, seek medical help. Other Products Categories available Dr. Fixit brings you the widest range of Construction Chemicals 612 Dr. Fixit Sureseal

2. COATINGS & PAINTS 76 4 INTERNAL DAMP WALL APPLICATION } } Thorough wire brush followed by sanding with emery paper before application of Dr.Fixit Sureseal. } } Apply two coat of Dr. Fixit Sureseal without any dilution maintaining the spreading rate of 4 to 5 Sq.mtrs/kg/ coat. Allow the first coat to cure for at least 2 to 4 hours before applying the second and final coat. } } Allow the coating to air cure for 2 days before proceeding for internal painting. Precautions & Limitations } } Do not dilute “Dr. Fixit Sureseal”. } } All corners, gaps, joints, protrusions & outlets shall be coated with extra coat. } } All surface cracks more then 2mm should be prepared with polymer modified mortar using Dr. Fixit Pidicrete U R P. } } Always cover an area larger (minimum 2 Sft for internal walls & 5 Sft on either side for external walls and Roof). } } Do not apply Dr. Fixit Sureseal on efflorescence. } } Never apply paint if rain is forecast, or expected, during the day of application. } } Patch repair on roof & external walls provides temporary relief. Ideal recommendation solution is to go for comprehensive waterproofing on entire surface . Technical Information PROPERTIES SPECIFICATION R E SU LTS Appearance Free flowing viscous Liquid Color White % Solids 60 ± 2 Tensile Strength (Mpa) ASTM D 412 > 2.5 Water Absorption Resistance ASTM D 471 Excellent Algae & fungal resistance Excellent Elongation 45 - 60 % DFT 180 – 220 in two coats Theoretical Coverage* 2.0 - 2.5 sqmt/kg in two coats *Coverage may vary depending upon the texture and porosity of the surface. Shelf Life Shelf life is 24 m onths from the date of manufacturing if stored in original and unopened packaging in a cool dry place away from direct sunligh t. 612 Dr. Fixit Sureseal

1. 75 COATINGS & PAINTS Description Dr. Fixit Sureseal is a specially designed waterproof coating once which cured forms breathable, very tough yet elastic film which develops strong bonding to damp surfaces. It is ideal for patch repair of internal and external walls as well as temporary patch repair of roofs. This product offers excellent protection for repaired surfaces and effectively covers hairline cracks. Typical Applications } } Mild damp surfaces of following kind - internal walls, external walls, screed roofs, parapets, chajjas etc. Features } } Very tough yet elastic and breathable film } } Provides strongly bonded waterproof coating } } No dilution required, ready to use } } Tintable and can be used over painted surfaces } } Prevents Mildew, Fungal & bad odour Packaging 1, 5 & 20 kg Methods of Application 1 SURFACE PREPARATION } } Wash the surface thoroughly using water and a strong brush. Remove all loosely bound sand particles, neroo or instant lime, POP ,black spots, fungus, moss on moisture captured walls and any poorly adhering painted surface. } } If the surface under the existing paint is weak and should be stripped, and removed with repeated cleaning process. } } Entire surface should be in saturated surface dry (SSD) condition prior to application of Dr. Fixit Sureseal. } } Inspect the screed, plaster surfaces to identify and locate the cracks, } } Non- structural cracks less than 2 mm should be cleaned free of dust. Apply/ pour Dr. Fixit Sureseal on the cracks and wait for it to dry. } } If existing plaster is in very poor condition, repair the concerned area from positive side to stop the source of dampness. 2 EXTERIOR WALL APPLICATION } } Apply two coat of Dr. Fixit Sureseal without any dilution maintaining the spreading rate of 4 to 5 Sq.mtrs/kg/ coat. Allow the first coat to cure for at least 2 to 4 hours before applying the second and final coat. } } Allow the coating to air cure for 2 days. 3 ROOF APPLICATION } } Apply two coat of Dr. Fixit Sureseal without any dilution maintaining the spreading rate of 4 to 5 Sq.mtrs/kg/ coat. Allow the first coat to cure for at least 2 to 4 hours before applying the second and final coat. } } Allow the coating to air cure for 2 days. Dr. Fixit Sureseal WATERPROOF COATING FOR PATCH REPAIR OF DAMP & REPAIRED WALLS AND ROOF Sureseal 7/09/18 612 Dr. Fixit Sureseal

Views

  • 3373 Total Views
  • 2508 Website Views
  • 865 Embeded Views

Actions

  • 0 Social Shares
  • 0
  • 0
  • 0 Comments

Share count

  • 0  Facebook
  • 0  Twitter
  • 0  LinkedIn

Embeds 5

  • 41 www.sab-us.com
  • 10 161.97.92.48
  • 2 161.97.92.48:8011
  • 154 www.google.com
  • 8

Website Visitors - 508549