AWAZEL Fiber Board 10mm
Description
AWAZEL FIBER BOARD is a bitumen fiber joint filler board made from sugar cane fiber waste, Cane fibers are longer and more resilient for superior expansion and contraction in filler boards. Asphalt makes the boards very tough and durable as well as increases the life span of the product.
Special Features
• Excellent compression when subjected to a load between 689 to 5171 kPa (or 100 to 750 PSi) in order to compress it by 50% of its original thickness, it shows a loss of not more than 0.1 to 0.2% by weight.
• Excellent concrete bonding
• Low moisture absorbation
• Durability and easy handling
• Load handling ability
• Unaffected by temprature changes
• Excellent Recovery when compressed to 50% of its thickness, it is observed that it recovers to 80-85% of its original thickness, within 10 minutes after the load is removed. Thus preventing the concrete from cracking.
• Excellent Extrusion when compressed to 50% of its thickness with 3 edges restrained, it shows an extrusion of not more than 1 to 2mm on its free edge. (Permitted : less than or equal to 6.4mm)
Uses
AWAZEL FIBER BOARD is recommended for Expansion joint filler strips in all concrete traffic surfaces like highways, airport, runways and streets. Also recommended in driveways, aprons, pavements, curbs, gutters . Can be used for other concrete
paving work and in reinforced concrete structures like piers.
Method for Application
AWAZEL FIBER BOARD is brought flush with the concrete slab and extends full depth of the slab, placed approximately ¾ of an inch below the surface of the concrete slab. A suitable sealant is applied either at the top or bottom of the slab to close the joint against hydrostatic pressure. The dowel bar is used to preserve alignment of adjacent sections of concrete slab. AWAZEL FIBER BOARD is fabricated to receive dowel bars and the entire joint assembly is placed in position.
AWAZEL FIBER BOARD is installed along with the steel grid work after this process is complete the concrete is poured into the grid work
Health & Safety
AWAZEL FIBER BOARD has no health hazard due to its use and applications.
Storage
Should be kept flat in original packing in a shaded area. Normally the pallets can be stacked one over another.
Packaging
AWAZEL FIBER BOARD are produced in sheets of 10 x 2.2 x 1.22 and 10 x 2.44 x 1.22 meters,.
AWAZEL FIBER BOARD is a bitumen fiber joint filler board made from sugar cane fiber waste, Cane fibers are longer and more resilient for superior expansion and contraction in filler boards. Asphalt makes the boards very tough and durable as well as increases the life span of the product.
Special Features
• Excellent compression when subjected to a load between 689 to 5171 kPa (or 100 to 750 PSi) in order to compress it by 50% of its original thickness, it shows a loss of not more than 0.1 to 0.2% by weight.
• Excellent concrete bonding
• Low moisture absorbation
• Durability and easy handling
• Load handling ability
• Unaffected by temprature changes
• Excellent Recovery when compressed to 50% of its thickness, it is observed that it recovers to 80-85% of its original thickness, within 10 minutes after the load is removed. Thus preventing the concrete from cracking.
• Excellent Extrusion when compressed to 50% of its thickness with 3 edges restrained, it shows an extrusion of not more than 1 to 2mm on its free edge. (Permitted : less than or equal to 6.4mm)
Uses
AWAZEL FIBER BOARD is recommended for Expansion joint filler strips in all concrete traffic surfaces like highways, airport, runways and streets. Also recommended in driveways, aprons, pavements, curbs, gutters . Can be used for other concrete
paving work and in reinforced concrete structures like piers.
Method for Application
AWAZEL FIBER BOARD is brought flush with the concrete slab and extends full depth of the slab, placed approximately ¾ of an inch below the surface of the concrete slab. A suitable sealant is applied either at the top or bottom of the slab to close the joint against hydrostatic pressure. The dowel bar is used to preserve alignment of adjacent sections of concrete slab. AWAZEL FIBER BOARD is fabricated to receive dowel bars and the entire joint assembly is placed in position.
AWAZEL FIBER BOARD is installed along with the steel grid work after this process is complete the concrete is poured into the grid work
Health & Safety
AWAZEL FIBER BOARD has no health hazard due to its use and applications.
Storage
Should be kept flat in original packing in a shaded area. Normally the pallets can be stacked one over another.
Packaging
AWAZEL FIBER BOARD are produced in sheets of 10 x 2.2 x 1.22 and 10 x 2.44 x 1.22 meters,.
Views
- 3301 Total Views
- 2438 Website Views
- 863 Embeded Views
Actions
- Social Shares
- 2
- 0
- 0 Comments
Share count
- 0 Facebook
- 0 Twitter
- 0 LinkedIn
Embeds 3
- 45 www.sab-us.com
- 18 161.97.92.48
- 5 161.97.92.48:8011
-
LAVATEX 2000
11609 Views . -
الوقاية من الحرارة والرطوبة العزل المائي
6739 Views . -
DCL Product Conformity
6687 Views . -
Optimization Methodology To Implement Thermal
6236 Views . -
Wurth sealants & Adhesives
5922 Views . -
VELOSIT® TDS-PC-221-EN_2319 (Plug Cement)
5674 Views . -
طبقات نظام العزل كومبو رووف
5609 Views . -
AWAZEL PU 250 White
5606 Views . -
Approved Materials (TDS) for Sabtron Combo System
5043 Views . -
Fosroc Conbextra EPGP
4986 Views . -
Dr. Fixit PVA BOND.
4758 Views .