NEOSEAL FLEX 588 Elastomeric Cementitious Waterproof Coating
Two Component Elastomeric Cementitious Waterproofing Coating
NEOSEAL FLEX 588 is a two component elastomeric cementitious coating
with excellent flexibility for use on masonry and concrete substrates. The
powder is a blend of Portland Cements, selected Silica sands and Modifying
agents when mixed to a slurry consistency with NEOSEAL FLEX 588 Liquid,
an Acrylic Polymer emulsion, it cures to form a tough flexible coating with high
waterproofing properties.
PROPERTIES
- Easy to mix and apply.
- Application by brush, roller or spray.
- Suitable for light pedestrian traffic.
- Non Toxic, suitable for use in potable water applications.
- Excellent waterproofing properties & flexible in nature.
- Excellent adhesion to both porous & non porous substrates.
- Resistant to carbon dioxide and chloride ion diffusion.
- Once cured, a 2 mm thick NEOSEAL FLEX 588 membrane
will accommodate movement up to 0.6mm.
- Breathable coating.
BENEFITS
NEOSEAL FLEX 588 is easy to apply, suitable for waterproofing concrete
and masonry substrates in the following areas:
- Foundations
- Terraces, balconies and roofs.
- Waterproofing of gardens, swimming pools, basement, and sandwich application.
- Concrete gutters
- Under tile waterproofing
- Protect the concrete surfaces from carbonation and chloride attack
- Wet areas, like bathrooms, kitchens, etc.
- Protective coating on polyurethane foam insulation.
- Waterproofing and protection against brackish water.
APPLICATION
Apply with a short stiff bristle brush or roller once the 1st coat is applied
to achieve the desired thickness. Apply the 2nd coat after the 1st coat is
completely dried to achieve a minimum thickness of 1.8 – 2 mm.
PACKAGING
NEOSEAL FLEX 588 is available in 35 Kg Kit (Part A & Part B).
COVERAGE RATE
2kg / m² / Coat 1mm Thickness
STORAGE & SHELF LIFE
NEOSEAL FLEX 588 kits should always be stored in dry and covered areas.
The product should not be exposed to direct sunlight or be kept near any source of heat.
The product Shelf life is up to 12 months when stored
as per the recommended storage conditions.
NEOSEAL FLEX 588 is a two component elastomeric cementitious coating
with excellent flexibility for use on masonry and concrete substrates. The
powder is a blend of Portland Cements, selected Silica sands and Modifying
agents when mixed to a slurry consistency with NEOSEAL FLEX 588 Liquid,
an Acrylic Polymer emulsion, it cures to form a tough flexible coating with high
waterproofing properties.
PROPERTIES
- Easy to mix and apply.
- Application by brush, roller or spray.
- Suitable for light pedestrian traffic.
- Non Toxic, suitable for use in potable water applications.
- Excellent waterproofing properties & flexible in nature.
- Excellent adhesion to both porous & non porous substrates.
- Resistant to carbon dioxide and chloride ion diffusion.
- Once cured, a 2 mm thick NEOSEAL FLEX 588 membrane
will accommodate movement up to 0.6mm.
- Breathable coating.
BENEFITS
NEOSEAL FLEX 588 is easy to apply, suitable for waterproofing concrete
and masonry substrates in the following areas:
- Foundations
- Terraces, balconies and roofs.
- Waterproofing of gardens, swimming pools, basement, and sandwich application.
- Concrete gutters
- Under tile waterproofing
- Protect the concrete surfaces from carbonation and chloride attack
- Wet areas, like bathrooms, kitchens, etc.
- Protective coating on polyurethane foam insulation.
- Waterproofing and protection against brackish water.
APPLICATION
Apply with a short stiff bristle brush or roller once the 1st coat is applied
to achieve the desired thickness. Apply the 2nd coat after the 1st coat is
completely dried to achieve a minimum thickness of 1.8 – 2 mm.
PACKAGING
NEOSEAL FLEX 588 is available in 35 Kg Kit (Part A & Part B).
COVERAGE RATE
2kg / m² / Coat 1mm Thickness
STORAGE & SHELF LIFE
NEOSEAL FLEX 588 kits should always be stored in dry and covered areas.
The product should not be exposed to direct sunlight or be kept near any source of heat.
The product Shelf life is up to 12 months when stored
as per the recommended storage conditions.
Views
- 2429 Total Views
- 1864 Website Views
- 565 Embeded Views
Actions
- Social Shares
- 0
- 0
- 0 Comments
Share count
- 0 Facebook
- 0 Twitter
- 0 LinkedIn
Embeds 3
- 45 www.sab-us.com
- 11 161.97.92.48
- 2 161.97.92.48:8011
-
LAVATEX 2000
11587 Views . -
الوقاية من الحرارة والرطوبة العزل المائي
6723 Views . -
DCL Product Conformity
6669 Views . -
Optimization Methodology To Implement Thermal
6225 Views . -
Wurth sealants & Adhesives
5889 Views . -
VELOSIT® TDS-PC-221-EN_2319 (Plug Cement)
5670 Views . -
طبقات نظام العزل كومبو رووف
5603 Views . -
AWAZEL PU 250 White
5599 Views . -
Approved Materials (TDS) for Sabtron Combo System
5029 Views . -
Fosroc Conbextra EPGP
4981 Views . -
Dr. Fixit PVA BOND.
4750 Views .