PENEBAR™ SW-45 Rapid Concrete Joint Waterstop

Public Channel / Data Sheets

PENEBAR™ SW-45 Rapid is a unique
bentonite infused butyl rubber sealing
compound designed to expand rapidly when
exposed to moisture, making it a
self-healing joint material for construction
joint applications.

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select Link to start with 

2. RATE OF RAPID EXPANSION Freshwater exposure results: 24 hours 140% expansion Visible signs of cracking along edges of specimen 48 hours 175% expansion Splitting along sides of specimen; both ends opening up like a flower 72 hours 190% expansion More pronounced splitting along sides and ends 120 hours 210% expansion Specimen’s expansion became so great that further testing was impracticable Saltwater exposure results: 24 hours 107% expansion No visible sign of deterioration 48 hours 112% expansion No visible sign of deterioration 72 hours 114% expansion No visible sign of deterioration 120 hours 118% expansion No visible sign of deterioration SPECIAL CONSIDERATIONS w Always use PENEBAR™ PRIMER to ensure tight adhesion and to aid in preventing PENEBAR™ SW-45 Rapid from moving during the concrete pour. For vertical surfaces, nails may be used in conjunction with PENEBAR™ PRIMER to hold the product in place. w Place PENEBAR™ SW-45 Rapid so that it is no closer than 50 mm (2”) from the outer surface of poured structure. If a Keyway is utilized, place the PENEBAR™ SW-45 Rapid into the bottom of the formed Keyway area. w When used on pipes and other structural penetrations, PENEBAR™ SW-45 Rapid should be cut to measured length and placed around the penetration with ends butted. w In all cases, PENEBAR™ SW-45 Rapid should be in direct contact with the substrate along the entire length of the instal - lation. w PENEBAR™ SW-45 Rapid is not an expansion joint sealant and only suitable for non-moving concrete joints. w PENEBAR™ SW-45 Rapid should not be installed in standing water or on frozen or icy surfaces. PENEBAR™ SW-45 Rapid DIRECTIONS FOR USE How to apply PENEBAR™ SW-45 Rapid on poured-in-place construction joints: 1) Apply PENEBAR™ PRIMER by using brush at a minimum of 0.1 mm (4 mils) thick by 50 mm (2”) wide over the entire surface length to receive PENEBAR™ SW-45 Rapid. Allow it to dry for 10-15 minutes at a temperature of 25°C (77°F) or, where the temperatures are low, allow it to dry for a longer time. 2) By using the heel of the hand and moderate pressure, press a bead of PENEBAR™ SW-45 Rapid firmly into position on the standing structure. Make sure the product has bonded with the primed area. 3) Where required, splice ends to form a continuous, uninterrupted seal. For best results, cut each end at opposite 45° angles and tight - ly butt ends together. DO NOT OVERLAP ENDS. Gently knead the spliced ends creating an uninterrupted seal. 4) Peel the protective covering from the exposed side of the installed PENEBAR™ SW-45 Rapid. 5) Follow standard concrete placing procedures from here onwards. PACKAGING Type A is packaged 30 meters/carton (6 rolls, 19 mm × 25mm × 5 m each). Type B is packaged 24 meters/carton (6 rolls, 9 mm × 25 mm × 4 m each). STORAGE / SHELF LIFE When stored in a dry enclosed area off the ground at a minimum tem - perature of 7°C (45°F) in unopened, undamaged cartons, shelf life is unlimited. SAFE HANDLING INFORMATION Keep out of reach of children. Refer to the Safety Data Sheet for additional information. TOTAL CONCRETE PROTECTION ® Page 2 v. K02 45 Research Way, Suite 203, East Setauket, NY 11733 (631) 941-9700 • info@penetron.com • penetron.com PENETRON INTERNATIONAL, LTD. WARRANTY: PENETRON INTERNATIONAL, LTD. warrants that the products manufac - tured by it shall be free from material defects and will conform to formulation standards and contain all components in their proper proportion. Should any of the products be proven defective, the liability to PENETRON INTERNATIONAL, LTD. shall be limited to replacement of the material proven to be defective, and PENETRON INTERNATIONAL, LTD. shall in no case be liable otherwise or for incidental or consequential damages. PENETRON INTERNATIONAL, LTD. MAKES NO WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED. User shall determine the suitability of the product for its intended use and assume all risks and liability in connection therewith.

1. RATE OF RAPID EXPANSION Freshwater exposure results: 24 hours 140% expansion Visible signs of cracking along edges of specimen 48 hours 175% expansion Splitting along sides of specimen; both ends opening up like a flower 72 hours 190% expansion More pronounced splitting along sides and ends 120 hours 210% expansion Specimen’s expansion became so great that further testing was impracticable Saltwater exposure results: 24 hours 107% expansion No visible sign of deterioration 48 hours 112% expansion No visible sign of deterioration 72 hours 114% expansion No visible sign of deterioration 120 hours 118% expansion No visible sign of deterioration SPECIAL CONSIDERATIONS w Always use PENEBAR™ PRIMER to ensure tight adhesion and to aid in preventing PENEBAR™ SW-45 Rapid from moving during the concrete pour. For vertical surfaces, nails may be used in conjunction with PENEBAR™ PRIMER to hold the product in place. w Place PENEBAR™ SW-45 Rapid so that it is no closer than 50 mm (2”) from the outer surface of poured structure. If a Keyway is utilized, place the PENEBAR™ SW-45 Rapid into the bottom of the formed Keyway area. w When used on pipes and other structural penetrations, PENEBAR™ SW-45 Rapid should be cut to measured length and placed around the penetration with ends butted. w In all cases, PENEBAR™ SW-45 Rapid should be in direct contact with the substrate along the entire length of the instal - lation. w PENEBAR™ SW-45 Rapid is not an expansion joint sealant and only suitable for non-moving concrete joints. w PENEBAR™ SW-45 Rapid should not be installed in standing water or on frozen or icy surfaces. PENEBAR™ SW-45 Rapid DIRECTIONS FOR USE How to apply PENEBAR™ SW-45 Rapid on poured-in-place construction joints: 1) Apply PENEBAR™ PRIMER by using brush at a minimum of 0.1 mm (4 mils) thick by 50 mm (2”) wide over the entire surface length to receive PENEBAR™ SW-45 Rapid. Allow it to dry for 10-15 minutes at a temperature of 25°C (77°F) or, where the temperatures are low, allow it to dry for a longer time. 2) By using the heel of the hand and moderate pressure, press a bead of PENEBAR™ SW-45 Rapid firmly into position on the standing structure. Make sure the product has bonded with the primed area. 3) Where required, splice ends to form a continuous, uninterrupted seal. For best results, cut each end at opposite 45° angles and tight - ly butt ends together. DO NOT OVERLAP ENDS. Gently knead the spliced ends creating an uninterrupted seal. 4) Peel the protective covering from the exposed side of the installed PENEBAR™ SW-45 Rapid. 5) Follow standard concrete placing procedures from here onwards. PACKAGING Type A is packaged 30 meters/carton (6 rolls, 19 mm × 25mm × 5 m each). Type B is packaged 24 meters/carton (6 rolls, 9 mm × 25 mm × 4 m each). STORAGE / SHELF LIFE When stored in a dry enclosed area off the ground at a minimum tem - perature of 7°C (45°F) in unopened, undamaged cartons, shelf life is unlimited. SAFE HANDLING INFORMATION Keep out of reach of children. Refer to the Safety Data Sheet for additional information. TOTAL CONCRETE PROTECTION ® DESCRIPTION PENEBAR™ SW-45 Rapid is a unique bentonite infused butyl rubber sealing compound designed to expand rapidly when exposed to moisture, making it a self-healing joint material for construction joint applications. APPLICATIONS Building foundations Slabs Retaining walls Storage tanks Other similar non-moving cold construction joints PHYSICAL PROPERTIES Color: Black Specific gravity (ASTM D71): 1.55 ± 0.05 Volatile matter (ASTM D6): 1% maximum Penetration, 150 g cone @ 25°C (77°F); 5 sec (ASTM D217): 40 ± 5 mm Application temperature range: -23°C to 38°C (-9°F to 100°F) Service temperature range: -34°C to 82°C (-29°F to 180°F) STANDARD Complies and meets the requirements to EU REACH Regulation (EC) No 1907/2006 Article 33(1) Obligation to provide information of safe use (see REACH requirement in report for details). ® TO T A L C O N CR E TE P R O T E C T I O N CONCRETE JOINT WATERSTOP Page 1

Views

  • 673 Total Views
  • 536 Website Views
  • 137 Embeded Views

Actions

  • 0 Social Shares
  • 0
  • 0
  • 0 Comments

Share count

  • 0  Facebook
  • 0  Twitter
  • 0  LinkedIn

Embeds 1

  • 1 www.sab-us.com

Website Visitors - 205490