Public Channel / Data Sheets

Solvent Based Bituminous Primer Complies with ASTM D 41

AWAZEL PRIMER D 41 is an asphaltic primer suitable for uses in roofing, damp proofing and waterproofing. It is used as surface dressing for masonry, metal, concrete substrate to improve the bond of bituminous materials.

FEATURES
• Improves the bond of bituminous materials.
• Binder for dust particles.
• Surface dressing to masonry, concrete and metal surfaces.
• Confirms to the requirements of ASTM D 41.
• Formulated for hot/tropical climates.

USES
AWAZEL PRIMER D 41 is suitable for use with asphalt in roofing, damp proofing and waterproofing below or above ground level, for application to concrete, masonry, metal and asphalt surfaces. Also used as a primer coat to receive membranes or liquid asphalts and asphalt products.

PACKING
AWAZEL PRIMER D 41 is packed in 180 kg drums and 16 kg Pail. Other weights are available upon request.
STORAGE
Store in a dry and shaded area in original packing. The container should be kept covered while working in order to prevent the evaporation of solvent.

COVERAGE
Approximate rate: 0.2 – 0.3 kg/m2. The exact rate will depend upon the porosity or smoothness of the surface.

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. AWAZEL P RIMER – D 41 Solvent Based Bituminous Primer Complies with ASTM D 41 DESCRIPTION AWAZEL PRIMER D 41 is a n asphaltic primer suitable for uses in roofing, damp proofing and wate rproofing. It is used as surface dressing for masonry, metal, concrete substrate to improve the bond of bituminous materials. FEATURES • Improves the bond of bituminous materials. • Binder for dust particles. • Surface dressing to masonry, concrete and metal surfaces. • Confirms to the requirements of ASTM D 41. • Formulated for hot /tropical climates. USES AWAZEL PRIMER D 41 is suitable for use with asphalt in roofing, damp proofing and waterproofing below or above ground level, for application to concrete, mas onry, metal and asphalt surfaces. Also used as a primer coat to receive membranes or liquid asphalts and asphalt products. INSTRUCTIONS FOR APPLICATION SurfacePreparation: The surface must be clean and free of oil, grease, debris or other foreign matters . Application : After stirring well, AWAZEL PRIMER D 41 can be applied by brush, roller or spray equipment. It Should be allowed to dry . CLEANING: The primer can be removed from equipment and tools with any suitable solvent such as gasoline or kero sene. C OVERAGE Approximate rate: 0.2 – 0.3 kg/m 2 . The exact rate will depend upon the porosity or smoothness of the surface. HEALTH & SAFETY Workers should wear protective tools such as gloves and goggles during application. PRECAUTIONS AWAZEL P RIMER D 41 contains volatile solvent and has a low flash point. Care must be taken to ensure that there is adequate ventilation in the working place; fires and naked flames should be kept at a distance. PACKING AWAZEL PRIMER D 41 is packed in 180 kg drums and 16 kg Pail. Other weights are available upon request. STORAGE Store in a dry and shaded area in original packing. The container should be kept covered while working in order to prevent the evaporation of solvent.

2. Dubai Office :Tel : +9714 – 3390600, Fax : +9714 - 3395095, P.O. Box : 37724, Dubai - U.A.E., E - mail : infouae@awazelcompany.com Abu Dhabi Office : Tel : +9712 – 5548220. Fax : +9712 – 5548221, P.O. Bo x : 108483, Abu Dhabi U.A.E. E - mail : infoauh@awazelcompany.com AWAZEL PRIMER – D 41 Solvent Based Bituminous Primer Complies with ASTM D 41 TECHNICAL DATA PROPERTY TYPICAL RESULTS TEST METHOD Saybolt Furol Viscosity at 25 o C 25 - 125 ASTM D 88 Distillation: Distillate, volume % of the primer Up to 225 O C Up to 3 60 O C 35 (minimum) 65 (maximum) ASTM D 402 Tests on Re sidue from distillation: Penetration at 25 O C, 0.1 mm Solubility in trichloroethylene, % 20 – 50 99 (min) ASTM D 5 ASTM D 2042 Water, volume % 0 .5 (maximum) ASTM D 95 Note : The above sh own technical data are typical results obtained, to the best of our knowledge, from our quality control records, extra details can be provided upon request, (AWAZEL reserves the right to alter the product specification without prior notice)

Views

  • 80 Total Views
  • 55 Website Views
  • 25 Embeded Views

Actions

  • 0 Social Shares
  • 2
  • 0
  • 0 Comments

Share count

  • 0  Facebook
  • 0  Twitter
  • 0  LinkedIn

Embeds 2

  • 3 www.sab-us.com
  • 5 161.97.92.48

Website Visitors - 49086